sudo: unable to resolve host garlic: Name or service not known debspawn 0.6.5 on garlic at 2026-03-14 06:55:41 UTC-0700 gpgv: Signature made Wed 04 Mar 2026 08:54:35 AM PST gpgv: using RSA key 3AFA757FAC6EA11D2FF45DF088D24287A2D898B1 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for /var/lib/lkspark/workspaces/0e0c6db2-2a99-40d9-a55f-5c09b7913847/arduino-core-avr_1.8.7+dfsg-1~deb13u1.dsc: no acceptable signature found dpkg-source: info: extracting arduino-core-avr in arduino-core-avr-1.8.7+dfsg dpkg-source: info: unpacking arduino-core-avr_1.8.7+dfsg.orig.tar.xz dpkg-source: info: unpacking arduino-core-avr_1.8.7+dfsg-1~deb13u1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying debian-hacks/Don-t-use-DIRAVRBIN-variable-in-bootloaders-atmega8.patch dpkg-source: info: applying debian-hacks/Adjust-paths-for-gcc-avr-and-avrdude.patch dpkg-source: info: applying debian-hacks/optimize-fno-jump-tables.diff ╔═══════════════════════╗ ║ Package build ║ ╚═══════════════════════╝ Package: arduino-core-avr Version: 1.8.7+dfsg-1~deb13u1 Distribution: landing Architecture: amd64 Free space in workspace: 401.5GiB ┌───────────────────────────────────────┐ │ Preparing container for build │ └───────────────────────────────────────┘ Get:1 https://repo.pureos.net/pureos landing InRelease [9625 B] Get:2 https://repo.pureos.net/pureos landing/main all Packages [4001 kB] Get:3 https://repo.pureos.net/pureos landing/main amd64 Packages [4639 kB] Fetched 8649 kB in 1s (7516 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages will be upgraded: apt bash debianutils dpkg dpkg-dev e2fsprogs gpgv init-system-helpers libapt-pkg7.0 libc-bin libc-dev-bin libc6 libc6-dev libcap2 libcom-err2 libdebconfclient0 libdpkg-perl libexpat1 libext2fs2t64 libpam-modules libpam-modules-bin libpam-runtime libpam0g libpcre2-8-0 libperl5.40 libpython3.13-minimal libsqlite3-0 libss2 libssl3t64 libsystemd0 libudev1 linux-libc-dev logsave openssl openssl-provider-legacy patch perl perl-base perl-modules-5.40 pureos-archive-keyring python3-minimal python3.13-minimal sqv tzdata 44 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 37.3 MB of archives. After this operation, 190 kB of additional disk space will be used. Get:1 https://repo.pureos.net/pureos landing/main amd64 debianutils amd64 5.23.2 [92.4 kB] Get:2 https://repo.pureos.net/pureos landing/main amd64 bash amd64 5.2.37-2+b7 [1501 kB] Get:3 https://repo.pureos.net/pureos landing/main amd64 libc6-dev amd64 2.41-12+deb13u1 [1994 kB] Get:4 https://repo.pureos.net/pureos landing/main amd64 libc-dev-bin amd64 2.41-12+deb13u1 [58.5 kB] Get:5 https://repo.pureos.net/pureos landing/main all linux-libc-dev all 6.12.63-1 [2720 kB] Get:6 https://repo.pureos.net/pureos landing/main amd64 libc6 amd64 2.41-12+deb13u1 [2851 kB] Get:7 https://repo.pureos.net/pureos landing/main amd64 openssl-provider-legacy amd64 3.5.4-1~deb13u1 [308 kB] Get:8 https://repo.pureos.net/pureos landing/main amd64 libssl3t64 amd64 3.5.4-1~deb13u1 [2441 kB] Get:9 https://repo.pureos.net/pureos landing/main amd64 libcap2 amd64 1:2.75-10+b3 [28.8 kB] Get:10 https://repo.pureos.net/pureos landing/main amd64 libsystemd0 amd64 257.9-1~deb13u1 [453 kB] Get:11 https://repo.pureos.net/pureos landing/main amd64 libudev1 amd64 257.9-1~deb13u1 [152 kB] Get:12 https://repo.pureos.net/pureos landing/main amd64 libapt-pkg7.0 amd64 3.0.3 [1113 kB] Get:13 https://repo.pureos.net/pureos landing/main amd64 dpkg amd64 1.22.21 [1538 kB] Get:14 https://repo.pureos.net/pureos landing/main amd64 libperl5.40 amd64 5.40.1-6 [4341 kB] Get:15 https://repo.pureos.net/pureos landing/main amd64 perl amd64 5.40.1-6 [267 kB] Get:16 https://repo.pureos.net/pureos landing/main amd64 perl-base amd64 5.40.1-6 [1666 kB] Get:17 https://repo.pureos.net/pureos landing/main all perl-modules-5.40 all 5.40.1-6 [3019 kB] Get:18 https://repo.pureos.net/pureos landing/main amd64 patch amd64 2.8-2 [134 kB] Get:19 https://repo.pureos.net/pureos landing/main all dpkg-dev all 1.22.21 [1338 kB] Get:20 https://repo.pureos.net/pureos landing/main all libdpkg-perl all 1.22.21 [650 kB] Get:21 https://repo.pureos.net/pureos landing/main amd64 sqv amd64 1.3.0-3+b2 [661 kB] Get:22 https://repo.pureos.net/pureos landing/main amd64 apt amd64 3.0.3 [1452 kB] Get:23 https://repo.pureos.net/pureos landing/main all init-system-helpers all 1.69~deb13u1 [39.4 kB] Get:24 https://repo.pureos.net/pureos landing/main amd64 libc-bin amd64 2.41-12+deb13u1 [637 kB] Get:25 https://repo.pureos.net/pureos landing/main all libpam-runtime all 1.7.0-5 [249 kB] Get:26 https://repo.pureos.net/pureos landing/main amd64 libpam0g amd64 1.7.0-5 [69.9 kB] Get:27 https://repo.pureos.net/pureos landing/main amd64 libpam-modules-bin amd64 1.7.0-5 [49.1 kB] Get:28 https://repo.pureos.net/pureos landing/main amd64 libpam-modules amd64 1.7.0-5 [179 kB] Get:29 https://repo.pureos.net/pureos landing/main amd64 logsave amd64 1.47.2-3+b7 [24.9 kB] Get:30 https://repo.pureos.net/pureos landing/main amd64 libext2fs2t64 amd64 1.47.2-3+b7 [213 kB] Get:31 https://repo.pureos.net/pureos landing/main amd64 e2fsprogs amd64 1.47.2-3+b7 [591 kB] Get:32 https://repo.pureos.net/pureos landing/main amd64 libexpat1 amd64 2.7.1-2 [108 kB] Get:33 https://repo.pureos.net/pureos landing/main amd64 python3.13-minimal amd64 3.13.5-2 [2224 kB] Get:34 https://repo.pureos.net/pureos landing/main amd64 libpython3.13-minimal amd64 3.13.5-2 [862 kB] Get:35 https://repo.pureos.net/pureos landing/main amd64 python3-minimal amd64 3.13.5-1 [27.2 kB] Get:36 https://repo.pureos.net/pureos landing/main amd64 libdebconfclient0 amd64 0.280 [10.6 kB] Get:37 https://repo.pureos.net/pureos landing/main amd64 libpcre2-8-0 amd64 10.46-1~deb13u1 [299 kB] Get:38 https://repo.pureos.net/pureos landing/main amd64 libsqlite3-0 amd64 3.46.1-7 [914 kB] Get:39 https://repo.pureos.net/pureos landing/main all tzdata all 2025b-4+deb13u1 [260 kB] Get:40 https://repo.pureos.net/pureos landing/main all pureos-archive-keyring all 2026.02.0 [6876 B] Get:41 https://repo.pureos.net/pureos landing/main amd64 gpgv amd64 2.4.7-21+deb13u1+b1 [241 kB] Get:42 https://repo.pureos.net/pureos landing/main amd64 libcom-err2 amd64 1.47.2-3+b7 [25.0 kB] Get:43 https://repo.pureos.net/pureos landing/main amd64 libss2 amd64 1.47.2-3+b7 [29.7 kB] Get:44 https://repo.pureos.net/pureos landing/main amd64 openssl amd64 3.5.4-1~deb13u1 [1495 kB] Fetched 37.3 MB in 1s (31.4 MB/s) Extracting templates from packages: 68% Extracting templates from packages: 100% Preconfiguring packages ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13939 files and directories currently installed.) Preparing to unpack .../debianutils_5.23.2_amd64.deb ... Unpacking debianutils (5.23.2) over (5.23.1) ... Setting up debianutils (5.23.2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13939 files and directories currently installed.) Preparing to unpack .../bash_5.2.37-2+b7_amd64.deb ... Unpacking bash (5.2.37-2+b7) over (5.2.37-2+b2) ... Setting up bash (5.2.37-2+b7) ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13939 files and directories currently installed.) Preparing to unpack .../libc6-dev_2.41-12+deb13u1_amd64.deb ... Unpacking libc6-dev:amd64 (2.41-12+deb13u1) over (2.41-8) ... Preparing to unpack .../libc-dev-bin_2.41-12+deb13u1_amd64.deb ... Unpacking libc-dev-bin (2.41-12+deb13u1) over (2.41-8) ... Preparing to unpack .../linux-libc-dev_6.12.63-1_all.deb ... Unpacking linux-libc-dev (6.12.63-1) over (6.12.32-1) ... Preparing to unpack .../libc6_2.41-12+deb13u1_amd64.deb ... Unpacking libc6:amd64 (2.41-12+deb13u1) over (2.41-8) ... Setting up libc6:amd64 (2.41-12+deb13u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13939 files and directories currently installed.) Preparing to unpack .../openssl-provider-legacy_3.5.4-1~deb13u1_amd64.deb ... Unpacking openssl-provider-legacy (3.5.4-1~deb13u1) over (3.5.0-2) ... Setting up openssl-provider-legacy (3.5.4-1~deb13u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13939 files and directories currently installed.) Preparing to unpack .../libssl3t64_3.5.4-1~deb13u1_amd64.deb ... Unpacking libssl3t64:amd64 (3.5.4-1~deb13u1) over (3.5.0-2) ... Setting up libssl3t64:amd64 (3.5.4-1~deb13u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13939 files and directories currently installed.) Preparing to unpack .../libcap2_1%3a2.75-10+b3_amd64.deb ... Unpacking libcap2:amd64 (1:2.75-10+b3) over (1:2.75-8) ... Setting up libcap2:amd64 (1:2.75-10+b3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../libsystemd0_257.9-1~deb13u1_amd64.deb ... Unpacking libsystemd0:amd64 (257.9-1~deb13u1) over (257.6-1) ... Setting up libsystemd0:amd64 (257.9-1~deb13u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../libudev1_257.9-1~deb13u1_amd64.deb ... Unpacking libudev1:amd64 (257.9-1~deb13u1) over (257.6-1) ... Setting up libudev1:amd64 (257.9-1~deb13u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../libapt-pkg7.0_3.0.3_amd64.deb ... Unpacking libapt-pkg7.0:amd64 (3.0.3) over (3.0.2) ... Setting up libapt-pkg7.0:amd64 (3.0.3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../dpkg_1.22.21_amd64.deb ... Unpacking dpkg (1.22.21) over (1.22.20) ... Setting up dpkg (1.22.21) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../libperl5.40_5.40.1-6_amd64.deb ... Unpacking libperl5.40:amd64 (5.40.1-6) over (5.40.1-3) ... Preparing to unpack .../perl_5.40.1-6_amd64.deb ... Unpacking perl (5.40.1-6) over (5.40.1-3) ... Preparing to unpack .../perl-base_5.40.1-6_amd64.deb ... Unpacking perl-base (5.40.1-6) over (5.40.1-3) ... Setting up perl-base (5.40.1-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../perl-modules-5.40_5.40.1-6_all.deb ... Unpacking perl-modules-5.40 (5.40.1-6) over (5.40.1-3) ... Preparing to unpack .../archives/patch_2.8-2_amd64.deb ... Unpacking patch (2.8-2) over (2.8-1) ... Preparing to unpack .../dpkg-dev_1.22.21_all.deb ... Unpacking dpkg-dev (1.22.21) over (1.22.20) ... Preparing to unpack .../libdpkg-perl_1.22.21_all.deb ... Unpacking libdpkg-perl (1.22.21) over (1.22.20) ... Preparing to unpack .../sqv_1.3.0-3+b2_amd64.deb ... Unpacking sqv (1.3.0-3+b2) over (1.3.0-3) ... Setting up sqv (1.3.0-3+b2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13941 files and directories currently installed.) Preparing to unpack .../archives/apt_3.0.3_amd64.deb ... Unpacking apt (3.0.3) over (3.0.2) ... Setting up apt (3.0.3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13941 files and directories currently installed.) Preparing to unpack .../init-system-helpers_1.69~deb13u1_all.deb ... Unpacking init-system-helpers (1.69~deb13u1) over (1.68) ... Setting up init-system-helpers (1.69~deb13u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../libc-bin_2.41-12+deb13u1_amd64.deb ... Unpacking libc-bin (2.41-12+deb13u1) over (2.41-8) ... Setting up libc-bin (2.41-12+deb13u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../libpam-runtime_1.7.0-5_all.deb ... Unpacking libpam-runtime (1.7.0-5) over (1.7.0-3) ... Setting up libpam-runtime (1.7.0-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../libpam0g_1.7.0-5_amd64.deb ... Unpacking libpam0g:amd64 (1.7.0-5) over (1.7.0-3) ... Setting up libpam0g:amd64 (1.7.0-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../libpam-modules-bin_1.7.0-5_amd64.deb ... Unpacking libpam-modules-bin (1.7.0-5) over (1.7.0-3) ... Setting up libpam-modules-bin (1.7.0-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../libpam-modules_1.7.0-5_amd64.deb ... Unpacking libpam-modules:amd64 (1.7.0-5) over (1.7.0-3) ... Setting up libpam-modules:amd64 (1.7.0-5) ... Installing new version of config file /etc/security/namespace.init ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../logsave_1.47.2-3+b7_amd64.deb ... Unpacking logsave (1.47.2-3+b7) over (1.47.2-1+b1) ... Preparing to unpack .../libext2fs2t64_1.47.2-3+b7_amd64.deb ... Leaving 'diversion of /lib/x86_64-linux-gnu/libe2p.so.2 to /lib/x86_64-linux-gnu/libe2p.so.2.usr-is-merged by libext2fs2t64' Leaving 'diversion of /lib/x86_64-linux-gnu/libe2p.so.2.3 to /lib/x86_64-linux-gnu/libe2p.so.2.3.usr-is-merged by libext2fs2t64' Leaving 'diversion of /lib/x86_64-linux-gnu/libext2fs.so.2 to /lib/x86_64-linux-gnu/libext2fs.so.2.usr-is-merged by libext2fs2t64' Leaving 'diversion of /lib/x86_64-linux-gnu/libext2fs.so.2.4 to /lib/x86_64-linux-gnu/libext2fs.so.2.4.usr-is-merged by libext2fs2t64' Unpacking libext2fs2t64:amd64 (1.47.2-3+b7) over (1.47.2-1+b1) ... Setting up libext2fs2t64:amd64 (1.47.2-3+b7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../e2fsprogs_1.47.2-3+b7_amd64.deb ... Unpacking e2fsprogs (1.47.2-3+b7) over (1.47.2-1+b1) ... Preparing to unpack .../libexpat1_2.7.1-2_amd64.deb ... Unpacking libexpat1:amd64 (2.7.1-2) over (2.7.1-1) ... Preparing to unpack .../python3.13-minimal_3.13.5-2_amd64.deb ... Unpacking python3.13-minimal (3.13.5-2) over (3.13.3-2) ... Preparing to unpack .../libpython3.13-minimal_3.13.5-2_amd64.deb ... find: ‘/usr/lib/python3’: No such file or directory Unpacking libpython3.13-minimal:amd64 (3.13.5-2) over (3.13.3-2) ... Setting up libpython3.13-minimal:amd64 (3.13.5-2) ... Setting up libexpat1:amd64 (2.7.1-2) ... Setting up python3.13-minimal (3.13.5-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../python3-minimal_3.13.5-1_amd64.deb ... Unpacking python3-minimal (3.13.5-1) over (3.13.3-1) ... Preparing to unpack .../libdebconfclient0_0.280_amd64.deb ... Unpacking libdebconfclient0:amd64 (0.280) over (0.278) ... Setting up libdebconfclient0:amd64 (0.280) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../libpcre2-8-0_10.46-1~deb13u1_amd64.deb ... Unpacking libpcre2-8-0:amd64 (10.46-1~deb13u1) over (10.45-1) ... Setting up libpcre2-8-0:amd64 (10.46-1~deb13u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../libsqlite3-0_3.46.1-7_amd64.deb ... Unpacking libsqlite3-0:amd64 (3.46.1-7) over (3.46.1-6) ... Setting up libsqlite3-0:amd64 (3.46.1-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13942 files and directories currently installed.) Preparing to unpack .../0-tzdata_2025b-4+deb13u1_all.deb ... Unpacking tzdata (2025b-4+deb13u1) over (2025b-3) ... Preparing to unpack .../1-pureos-archive-keyring_2026.02.0_all.deb ... Unpacking pureos-archive-keyring (2026.02.0) over (2024.04.0) ... Preparing to unpack .../2-gpgv_2.4.7-21+deb13u1+b1_amd64.deb ... Unpacking gpgv (2.4.7-21+deb13u1+b1) over (2.4.7-21) ... Preparing to unpack .../3-libcom-err2_1.47.2-3+b7_amd64.deb ... Unpacking libcom-err2:amd64 (1.47.2-3+b7) over (1.47.2-1+b1) ... Preparing to unpack .../4-libss2_1.47.2-3+b7_amd64.deb ... Unpacking libss2:amd64 (1.47.2-3+b7) over (1.47.2-1+b1) ... Preparing to unpack .../5-openssl_3.5.4-1~deb13u1_amd64.deb ... Unpacking openssl (3.5.4-1~deb13u1) over (3.5.0-2) ... Setting up linux-libc-dev (6.12.63-1) ... Setting up pureos-archive-keyring (2026.02.0) ... Setting up libcom-err2:amd64 (1.47.2-3+b7) ... Setting up tzdata (2025b-4+deb13u1) ... Current default time zone: 'Etc/UTC' Local time is now: Sat Mar 14 13:55:50 UTC 2026. Universal Time is now: Sat Mar 14 13:55:50 UTC 2026. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up patch (2.8-2) ... Setting up libss2:amd64 (1.47.2-3+b7) ... Setting up logsave (1.47.2-3+b7) ... Setting up perl-modules-5.40 (5.40.1-6) ... Setting up gpgv (2.4.7-21+deb13u1+b1) ... Setting up python3-minimal (3.13.5-1) ... Setting up libc-dev-bin (2.41-12+deb13u1) ... Setting up openssl (3.5.4-1~deb13u1) ... Setting up e2fsprogs (1.47.2-3+b7) ... Setting up libperl5.40:amd64 (5.40.1-6) ... Setting up perl (5.40.1-6) ... Setting up libdpkg-perl (1.22.21) ... Setting up libc6-dev:amd64 (2.41-12+deb13u1) ... Setting up dpkg-dev (1.22.21) ... Processing triggers for libc-bin (2.41-12+deb13u1) ... Processing triggers for debianutils (5.23.2) ... Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version (12.12). dpkg-dev is already the newest version (1.22.21). fakeroot is already the newest version (1.37.1.1-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ┌───────────────────────────────────────────────┐ │ Installing package build-dependencies │ └───────────────────────────────────────────────┘ Note, using directory './' to get the build dependencies Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: autoconf automake autopoint autotools-dev avr-libc binutils-avr bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gcc-avr gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libpipeline1 libtool libuchardet0 libunistring5 libxml2 m4 man-db po-debconf sensible-utils 0 upgraded, 32 newly installed, 0 to remove and 0 not upgraded. Need to get 68.4 MB of archives. After this operation, 459 MB of additional disk space will be used. Get:1 https://repo.pureos.net/pureos landing/main all sensible-utils all 0.0.25 [25.0 kB] Get:2 https://repo.pureos.net/pureos landing/main amd64 libmagic-mgc amd64 1:5.46-5 [338 kB] Get:3 https://repo.pureos.net/pureos landing/main amd64 libmagic1t64 amd64 1:5.46-5 [109 kB] Get:4 https://repo.pureos.net/pureos landing/main amd64 file amd64 1:5.46-5 [43.6 kB] Get:5 https://repo.pureos.net/pureos landing/main amd64 gettext-base amd64 0.23.1-2 [243 kB] Get:6 https://repo.pureos.net/pureos landing/main amd64 libuchardet0 amd64 0.0.8-1+b2 [68.9 kB] Get:7 https://repo.pureos.net/pureos landing/main amd64 groff-base amd64 1.23.0-9 [1187 kB] Get:8 https://repo.pureos.net/pureos landing/main amd64 bsdextrautils amd64 2.41-5 [94.6 kB] Get:9 https://repo.pureos.net/pureos landing/main amd64 libpipeline1 amd64 1.5.8-1 [42.0 kB] Get:10 https://repo.pureos.net/pureos landing/main amd64 man-db amd64 2.13.1-1 [1469 kB] Get:11 https://repo.pureos.net/pureos landing/main amd64 m4 amd64 1.4.19-8 [294 kB] Get:12 https://repo.pureos.net/pureos landing/main all autoconf all 2.72-3.1 [494 kB] Get:13 https://repo.pureos.net/pureos landing/main all autotools-dev all 20240727.1 [60.2 kB] Get:14 https://repo.pureos.net/pureos landing/main all automake all 1:1.17-4 [862 kB] Get:15 https://repo.pureos.net/pureos landing/main all autopoint all 0.23.1-2 [770 kB] Get:16 https://repo.pureos.net/pureos landing/main amd64 binutils-avr amd64 2.43.50.20250108-1 [2035 kB] Get:17 https://repo.pureos.net/pureos landing/main amd64 gcc-avr amd64 1:14.2.0-2 [50.7 MB] Get:18 https://repo.pureos.net/pureos landing/main all avr-libc all 1:2.2.1-1 [4428 kB] Get:19 https://repo.pureos.net/pureos landing/main all libdebhelper-perl all 13.24.2 [90.9 kB] Get:20 https://repo.pureos.net/pureos landing/main all libtool all 2.5.4-4 [539 kB] Get:21 https://repo.pureos.net/pureos landing/main all dh-autoreconf all 20 [17.1 kB] Get:22 https://repo.pureos.net/pureos landing/main all libarchive-zip-perl all 1.68-1 [104 kB] Get:23 https://repo.pureos.net/pureos landing/main all libfile-stripnondeterminism-perl all 1.14.1-2 [19.7 kB] Get:24 https://repo.pureos.net/pureos landing/main all dh-strip-nondeterminism all 1.14.1-2 [8620 B] Get:25 https://repo.pureos.net/pureos landing/main amd64 libelf1t64 amd64 0.192-4 [189 kB] Get:26 https://repo.pureos.net/pureos landing/main amd64 dwz amd64 0.15-1+b1 [110 kB] Get:27 https://repo.pureos.net/pureos landing/main amd64 libunistring5 amd64 1.3-2 [477 kB] Get:28 https://repo.pureos.net/pureos landing/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-2.1+deb13u2 [698 kB] Get:29 https://repo.pureos.net/pureos landing/main amd64 gettext amd64 0.23.1-2 [1680 kB] Get:30 https://repo.pureos.net/pureos landing/main all intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:31 https://repo.pureos.net/pureos landing/main all po-debconf all 1.0.21+nmu1 [248 kB] Get:32 https://repo.pureos.net/pureos landing/main all debhelper all 13.24.2 [919 kB] Fetched 68.4 MB in 2s (34.7 MB/s) Extracting templates from packages: 93% Extracting templates from packages: 100% Preconfiguring packages ... Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13945 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.25_all.deb ... Unpacking sensible-utils (0.0.25) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.46-5_amd64.deb ... Unpacking libmagic-mgc (1:5.46-5) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.46-5_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.46-5) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.46-5_amd64.deb ... Unpacking file (1:5.46-5) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.23.1-2_amd64.deb ... Unpacking gettext-base (0.23.1-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b2_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-9_amd64.deb ... Unpacking groff-base (1.23.0-9) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.41-5_amd64.deb ... Unpacking bsdextrautils (2.41-5) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.1-1_amd64.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-8_amd64.deb ... Unpacking m4 (1.4.19-8) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3.1_all.deb ... Unpacking autoconf (2.72-3.1) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20240727.1_all.deb ... Unpacking autotools-dev (20240727.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.17-4_all.deb ... Unpacking automake (1:1.17-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.23.1-2_all.deb ... Unpacking autopoint (0.23.1-2) ... Selecting previously unselected package binutils-avr. Preparing to unpack .../15-binutils-avr_2.43.50.20250108-1_amd64.deb ... Unpacking binutils-avr (2.43.50.20250108-1) ... Selecting previously unselected package gcc-avr. Preparing to unpack .../16-gcc-avr_1%3a14.2.0-2_amd64.deb ... Unpacking gcc-avr (1:14.2.0-2) ... Selecting previously unselected package avr-libc. Preparing to unpack .../17-avr-libc_1%3a2.2.1-1_all.deb ... Unpacking avr-libc (1:2.2.1-1) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.24.2_all.deb ... Unpacking libdebhelper-perl (13.24.2) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.5.4-4_all.deb ... Unpacking libtool (2.5.4-4) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../22-libfile-stripnondeterminism-perl_1.14.1-2_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.1-2) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../23-dh-strip-nondeterminism_1.14.1-2_all.deb ... Unpacking dh-strip-nondeterminism (1.14.1-2) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../24-libelf1t64_0.192-4_amd64.deb ... Unpacking libelf1t64:amd64 (0.192-4) ... Selecting previously unselected package dwz. Preparing to unpack .../25-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libunistring5:amd64. Preparing to unpack .../26-libunistring5_1.3-2_amd64.deb ... Unpacking libunistring5:amd64 (1.3-2) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../27-libxml2_2.12.7+dfsg+really2.9.14-2.1+deb13u2_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-2.1+deb13u2) ... Selecting previously unselected package gettext. Preparing to unpack .../28-gettext_0.23.1-2_amd64.deb ... Unpacking gettext (0.23.1-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../29-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../30-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../31-debhelper_13.24.2_all.deb ... Unpacking debhelper (13.24.2) ... Setting up binutils-avr (2.43.50.20250108-1) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up bsdextrautils (2.41-5) ... Setting up libmagic-mgc (1:5.46-5) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.24.2) ... Setting up libmagic1t64:amd64 (1:5.46-5) ... Setting up gettext-base (0.23.1-2) ... Setting up m4 (1.4.19-8) ... Setting up file (1:5.46-5) ... Setting up libelf1t64:amd64 (0.192-4) ... Setting up gcc-avr (1:14.2.0-2) ... Setting up autotools-dev (20240727.1) ... Setting up libunistring5:amd64 (1.3-2) ... Setting up autopoint (0.23.1-2) ... Setting up autoconf (2.72-3.1) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.25) ... Setting up libuchardet0:amd64 (0.0.8-1+b2) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-2.1+deb13u2) ... Setting up automake (1:1.17-4) ... update-alternatives: using /usr/bin/automake-1.17 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.1-2) ... Setting up gettext (0.23.1-2) ... Setting up libtool (2.5.4-4) ... Setting up avr-libc (1:2.2.1-1) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.1-2) ... Setting up groff-base (1.23.0-9) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.1-1) ... Building database of manual pages ... Setting up debhelper (13.24.2) ... Processing triggers for libc-bin (2.41-12+deb13u1) ... ┌───────────────┐ │ Build │ └───────────────┘ dpkg-buildpackage: info: source package arduino-core-avr dpkg-buildpackage: info: source version 1.8.7+dfsg-1~deb13u1 dpkg-buildpackage: info: source distribution trixie dpkg-buildpackage: info: host architecture amd64  dpkg-source --before-build .  debian/rules clean dh clean dh_clean  debian/rules binary dh binary dh_update_autotools_config dh_autoreconf create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/arduino-core-avr/ debian/rules override_dh_install make[1]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg' (Re)build .hex files for Atmega bootloaders... make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target atmega328 ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wl,--section-start=.text=0x7800 -o ATmegaBOOT_168_atmega328.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega328.elf ATmegaBOOT_168_atmega328.hex rm ATmegaBOOT_168_atmega328.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target atmega328_notp ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega328 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -Wl,--section-start=.text=0x7800 -o ATmegaBOOT_168_atmega328_notp.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega328_notp.elf ATmegaBOOT_168_atmega328_notp.hex rm ATmegaBOOT_168_atmega328_notp.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target atmega328_pro8 ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega328p -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED -Wl,--section-start=.text=0x7800 -o ATmegaBOOT_168_atmega328_pro_8MHz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega328_pro_8MHz.elf ATmegaBOOT_168_atmega328_pro_8MHz.hex rm ATmegaBOOT_168_atmega328_pro_8MHz.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target diecimila ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_diecimila.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_diecimila.elf ATmegaBOOT_168_diecimila.hex rm ATmegaBOOT_168_diecimila.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target lilypad ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_lilypad.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_lilypad.elf ATmegaBOOT_168_lilypad.hex rm ATmegaBOOT_168_lilypad.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target lilypad_resonator ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_lilypad_resonator.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_lilypad_resonator.elf ATmegaBOOT_168_lilypad_resonator.hex rm ATmegaBOOT_168_lilypad_resonator.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target mega ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega1280 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600 -Wl,--section-start=.text=0x1F000 -o ATmegaBOOT_168_atmega1280.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_atmega1280.elf ATmegaBOOT_168_atmega1280.hex rm ATmegaBOOT_168_atmega1280.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target ng ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_ng.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_ng.elf ATmegaBOOT_168_ng.hex rm ATmegaBOOT_168_ng.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target pro16 ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=16000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_pro_16MHz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_pro_16MHz.elf ATmegaBOOT_168_pro_16MHz.hex rm ATmegaBOOT_168_pro_16MHz.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target pro20 ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=20000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_pro_20mhz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_pro_20mhz.elf ATmegaBOOT_168_pro_20mhz.hex rm ATmegaBOOT_168_pro_20mhz.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' # # Folder 'bootloaders/atmega' # Build target pro8 ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' avr-gcc -g -Wall -Os -mmcu=atmega168 -DF_CPU=8000000L '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -Wl,--section-start=.text=0x3800 -o ATmegaBOOT_168_pro_8MHz.elf ATmegaBOOT_168.o avr-objcopy -j .text -j .data -O ihex ATmegaBOOT_168_pro_8MHz.elf ATmegaBOOT_168_pro_8MHz.hex rm ATmegaBOOT_168_pro_8MHz.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega' (Re)build .hex file for Atmega8 bootloader... # Folder 'bootloaders/atmega8' make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega8' rm -rf *.s rm -rf *.o *.elf rm -rf *.lst *.map make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega8' make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega8' avr-gcc -g -Wall -Os -funsigned-char -funsigned-bitfields -fno-inline-small-functions -fno-jump-tables -mmcu=atmega8 -Datmega8 -DF_CPU=16000000 -DBAUD_RATE=19200 -I/include -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT.o ATmegaBOOT.c avr-gcc -g -Wall -Os -funsigned-char -funsigned-bitfields -fno-inline-small-functions -fno-jump-tables -mmcu=atmega8 -Datmega8 -DF_CPU=16000000 -DBAUD_RATE=19200 -I/include -Wl,-Map,ATmegaBOOT.map,--section-start=.text=0x1c00 -o ATmegaBOOT.elf ATmegaBOOT.o avr-objdump -h -S ATmegaBOOT.elf > ATmegaBOOT.lst avr-objcopy -j .text -j .data -O ihex ATmegaBOOT.elf ATmegaBOOT.hex avr-objcopy -j .text -j .data -O binary ATmegaBOOT.elf ATmegaBOOT.bin avr-objcopy -j .text -j .data -O srec ATmegaBOOT.elf ATmegaBOOT.srec avr-gcc -S -g -Wall -Os -funsigned-char -funsigned-bitfields -fno-inline-small-functions -fno-jump-tables -mmcu=atmega8 -Datmega8 -DF_CPU=16000000 -DBAUD_RATE=19200 -I/include -g1 ATmegaBOOT.c avr-size ATmegaBOOT.hex text data bss dec hex filename 0 988 0 988 3dc ATmegaBOOT.hex make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/atmega8' (Re)build .hex files for bt bootloaders... make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/bt' rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/bt' # # Folder 'bootloaders/bt' # Build target atmega328_bt ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/bt' avr-gcc -g -Wall -O2 -mmcu=atmega328p -DF_CPU=16000000L -Wdate-time -D_FORTIFY_SOURCE=2 -c -o ATmegaBOOT_168.o ATmegaBOOT_168.c avr-gcc -g -Wall -O2 -mmcu=atmega328p -DF_CPU=16000000L -Wl,--section-start=.text=0x7000 -o ATmegaBOOT_168_atmega328_bt.elf ATmegaBOOT_168.o /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: address 0x81aa of ATmegaBOOT_168_atmega328_bt.elf section `.text' is not within region `text' /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: ATmegaBOOT_168_atmega328_bt.elf section `.data' will not fit in region `text' /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: address 0x81aa of ATmegaBOOT_168_atmega328_bt.elf section `.text' is not within region `text' /usr/lib/gcc/avr/14.2.0/../../../avr/bin/ld: region `text' overflowed by 428 bytes collect2: error: ld returned 1 exit status make[2]: *** [Makefile:92: ATmegaBOOT_168_atmega328_bt.elf] Error 1 make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/bt' # TODO # Rebuild the .hex files in the folders # bootloaders/caterina # bootloaders/caterina-Arduino_Robot # bootloaders/caterina-LilyPadUSB # # TODO # Rebuild the .hex file in # bootloaders/gemma # This is a more expenses task as this requires the sources of the # Adafruit-Trinket-Gemma-Bootloader (https://github.com/adafruit/Adafruit-Trinket-Gemma-Bootloader) # # TODO # Rebuild the .hex file in # bootloaders/lilypad/src # Fails probably due newer avr-gcc # (Re)build .hex files for optiboot bootloaders... make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/optiboot' rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/optiboot' # # Folder 'bootloaders/optiboot' # Build target atmega8 ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/optiboot' avr-gcc -g -Wall -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls -mmcu=atmega8 -DF_CPU=16000000L '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -Wdate-time -D_FORTIFY_SOURCE=2 -c -o optiboot.o optiboot.c optiboot.c:247:9: warning: "RAMSTART" redefined 247 | #define RAMSTART (0x100) | ^~~~~~~~ In file included from /usr/lib/avr/include/avr/io.h:322, from optiboot.c:157: /usr/lib/avr/include/avr/iom8.h:586:9: note: this is the location of the previous definition 586 | #define RAMSTART (0x60) | ^~~~~~~~ avr-gcc -g -Wall -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls -mmcu=atmega8 -DF_CPU=16000000L '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib -o optiboot_atmega8.elf optiboot.o avr-size optiboot_atmega8.elf text data bss dec hex filename 508 0 0 508 1fc optiboot_atmega8.elf avr-objcopy -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex optiboot_atmega8.elf optiboot_atmega8.hex avr-objdump -h -S optiboot_atmega8.elf > optiboot_atmega8.lst rm optiboot_atmega8.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/optiboot' # # Folder 'bootloaders/optiboot' # Build target atmega168 ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/optiboot' avr-gcc -g -Wall -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls -mmcu=atmega168 -DF_CPU=16000000L '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib -o optiboot_atmega168.elf optiboot.o avr-size optiboot_atmega168.elf text data bss dec hex filename 508 0 0 508 1fc optiboot_atmega168.elf avr-objcopy -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex optiboot_atmega168.elf optiboot_atmega168.hex avr-objdump -h -S optiboot_atmega168.elf > optiboot_atmega168.lst rm optiboot_atmega168.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/optiboot' # # Folder 'bootloaders/optiboot' # Build target atmega328 ############################## make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/optiboot' avr-gcc -g -Wall -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls -mmcu=atmega328p -DF_CPU=16000000L '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib -o optiboot_atmega328.elf optiboot.o avr-size optiboot_atmega328.elf text data bss dec hex filename 508 0 0 508 1fc optiboot_atmega328.elf avr-objcopy -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex optiboot_atmega328.elf optiboot_atmega328.hex avr-objdump -h -S optiboot_atmega328.elf > optiboot_atmega328.lst rm optiboot_atmega328.elf make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/optiboot' (Re)build .hex files for stk500v2 bootloaders... make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/stk500v2' -------- begin -------- Cleaning project: rm -f *.hex rm -f *.eep rm -f *.cof rm -f *.elf rm -f *.map rm -f *.sym rm -f *.lss rm -f stk500boot.o rm -f stk500boot.lst rm -f stk500boot.s rm -f stk500boot.d rm -f .dep/* -------- end -------- make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/stk500v2' make[2]: Entering directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/stk500v2' -------- begin -------- avr-gcc (GCC) 14.2.0 Copyright (C) 2024 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Compiling: stk500boot.c avr-gcc -c -mmcu=atmega2560 -I. -gdwarf-2 -DF_CPU=16000000UL -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -fno-jump-tables -Wall -Wstrict-prototypes -Wa,-adhlns=stk500boot.lst -std=gnu99 -D_MEGA_BOARD_ -MD -MP -MF .dep/stk500boot.o.d stk500boot.c -o stk500boot.o Linking: stk500boot.elf avr-gcc -mmcu=atmega2560 -I. -gdwarf-2 -DF_CPU=16000000UL -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -fno-jump-tables -Wall -Wstrict-prototypes -Wa,-adhlns=stk500boot.o -std=gnu99 -D_MEGA_BOARD_ -MD -MP -MF .dep/stk500boot.elf.d stk500boot.o --output stk500boot.elf -Wl,-Map=stk500boot.map,--cref -lm -Wl,--section-start=.text=3E000 Creating load file for Flash: stk500boot.hex avr-objcopy -O ihex -R .eeprom stk500boot.elf stk500boot.hex Creating load file for EEPROM: stk500boot.eep avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \ --change-section-lma .eeprom=0 -O ihex stk500boot.elf stk500boot.eep avr-objcopy: --change-section-lma .eeprom=0x0 never used Creating Extended Listing: stk500boot.lss avr-objdump -h -S stk500boot.elf > stk500boot.lss Creating Symbol Table: stk500boot.sym avr-nm -n stk500boot.elf > stk500boot.sym Size after: AVR Memory Usage ---------------- Device: atmega2560 Program: 6030 bytes (2.3% Full) (.text + .data + .bootloader) Data: 18 bytes (0.2% Full) (.data + .bss + .noinit) -------- end -------- mv stk500boot.hex stk500boot_v2_mega2560.hex make[2]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg/bootloaders/stk500v2' find bootloaders -type f \( -name Makefile -o -name ".c" -o -name ".h" \) -exec chmod -x {} \; dh_install make[1]: Leaving directory '/srv/build/arduino-core-avr-1.8.7+dfsg' dh_installdocs dh_installchangelogs dh_lintian dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'arduino-core-avr' in '../arduino-core-avr_1.8.7+dfsg-1~deb13u1_all.deb'.  dpkg-genbuildinfo --build=binary -O../arduino-core-avr_1.8.7+dfsg-1~deb13u1_amd64.buildinfo  dpkg-genchanges -DDistribution=landing --build=binary -mDebian Electronics Team -eDebian Electronics Team -O../arduino-core-avr_1.8.7+dfsg-1~deb13u1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included)  dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) This build required 4.8MiB of dedicated disk space. ┌────────────────────────────────────┐ │ Retrieving build artifacts │ └────────────────────────────────────┘ Copied 4 files. Done.