debspawn 0.6.5 on dill at 2024-05-10 03:28:32 UTC+0000 dpkg-source: info: extracting libconfigreader-simple-perl in libconfigreader-simple-perl-1.296 dpkg-source: info: unpacking libconfigreader-simple-perl_1.296.orig.tar.gz dpkg-source: info: unpacking libconfigreader-simple-perl_1.296-1.debian.tar.xz ╔═══════════════════════╗ ║ Package build ║ ╚═══════════════════════╝ Package: libconfigreader-simple-perl Version: 1.296-1 Distribution: landing Architecture: amd64 Free space in workspace: 389.1GiB ┌───────────────────────────────────────┐ │ Preparing container for build │ └───────────────────────────────────────┘ Get:1 https://repo.pureos.net/pureos landing InRelease [9625 B] Fetched 9625 B in 0s (54.1 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version (12.9). dpkg-dev is already the newest version (1.21.22pureos1). fakeroot is already the newest version (1.31-1.2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ┌───────────────────────────────────────────────┐ │ Installing package build-dependencies │ └───────────────────────────────────────────────┘ Note, using directory './' to get the build dependencies Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libcapture-tiny-perl libdebhelper-perl libdevel-symdump-perl libelf1 libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1 libpipeline1 libpod-coverage-perl libpod-parser-perl libsub-override-perl libsub-uplevel-perl libtest-output-perl libtest-pod-coverage-perl libtest-pod-perl libtest-warn-perl libtool libuchardet0 libxml2 m4 man-db po-debconf sensible-utils 0 upgraded, 39 newly installed, 0 to remove and 0 not upgraded. Need to get 16.1 kB/19.0 MB of archives. After this operation, 73.0 MB of additional disk space will be used. Get:1 https://repo.pureos.net/pureos landing/main all libtest-output-perl all 1.033-2 [16.1 kB] Fetched 16.1 kB in 0s (176 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13109 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.44-3_amd64.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../02-libmagic1_1%3a5.44-3_amd64.deb ... Unpacking libmagic1:amd64 (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.44-3_amd64.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-12_amd64.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.7-1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.22.4-10_amd64.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.38.1-5pureos1_amd64.deb ... Unpacking bsdextrautils (2.38.1-5pureos1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.11.2-2_amd64.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-3_amd64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../22-libelf1_0.188-2.1_amd64.deb ... Unpacking libelf1:amd64 (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1_amd64.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-3_amd64.deb ... Unpacking libicu72:amd64 (72.1-3) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3~deb12u1_amd64.deb ... Unpacking libxml2:amd64 (2.9.14+dfsg-1.3~deb12u1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-12_amd64.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../30-libcapture-tiny-perl_0.48-2_all.deb ... Unpacking libcapture-tiny-perl (0.48-2) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../31-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../32-libpod-parser-perl_1.65-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.65-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../33-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libsub-uplevel-perl. Preparing to unpack .../34-libsub-uplevel-perl_0.2800-3_all.deb ... Unpacking libsub-uplevel-perl (0.2800-3) ... Selecting previously unselected package libtest-output-perl. Preparing to unpack .../35-libtest-output-perl_1.033-2_all.deb ... Unpacking libtest-output-perl (1.033-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../36-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../37-libtest-pod-perl_1.52-2_all.deb ... Unpacking libtest-pod-perl (1.52-2) ... Selecting previously unselected package libtest-warn-perl. Preparing to unpack .../38-libtest-warn-perl_0.37-2_all.deb ... Unpacking libtest-warn-perl (0.37-2) ... Setting up libpipeline1:amd64 (1.5.7-1) ... Setting up libicu72:amd64 (72.1-3) ... Setting up bsdextrautils (2.38.1-5pureos1) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up libtest-pod-perl (1.52-2) ... Setting up libmagic1:amd64 (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up file (1:5.44-3) ... Setting up autotools-dev (20220109.1) ... Setting up libpod-parser-perl (1.65-1) ... Setting up autopoint (0.21-12) ... Setting up autoconf (2.71-3) ... Setting up libcapture-tiny-perl (0.48-2) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:amd64 (0.0.7-1) ... Setting up libsub-uplevel-perl (0.2800-3) ... Setting up libsub-override-perl (0.09-4) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libelf1:amd64 (0.188-2.1) ... Setting up libxml2:amd64 (2.9.14+dfsg-1.3~deb12u1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-12) ... Setting up libtool (2.4.7-5) ... Setting up libtest-warn-perl (0.37-2) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up libtest-output-perl (1.033-2) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.11.2-2) ... Building database of manual pages ... Setting up debhelper (13.11.4) ... Processing triggers for libc-bin (2.36-9+deb12u4) ... ┌───────────────┐ │ Build │ └───────────────┘ dpkg-buildpackage: info: source package libconfigreader-simple-perl dpkg-buildpackage: info: source version 1.296-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: host architecture amd64  dpkg-source --before-build .  debian/rules clean dh clean dh_clean  debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/srv/build/libconfigreader-simple-perl-1.296=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/srv/build/libconfigreader-simple-perl-1.296=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good WARNING: Older versions of ExtUtils::MakeMaker may errantly install README.pod as part of this distribution. It is recommended to avoid using this path in CPAN modules. Generating a Unix-style Makefile Writing Makefile for ConfigReader::Simple Writing MYMETA.yml and MYMETA.json dh_auto_build make -j8 make[1]: Entering directory '/srv/build/libconfigreader-simple-perl-1.296' cp lib/ConfigReader/Simple.pm blib/lib/ConfigReader/Simple.pm Manifying 1 pod document make[1]: Leaving directory '/srv/build/libconfigreader-simple-perl-1.296' dh_auto_test make -j8 test TEST_VERBOSE=1 make[1]: Entering directory '/srv/build/libconfigreader-simple-perl-1.296' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/_save.t ............ ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can('_save') ok 3 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 4 ok 5 - return value is false without list of directives ok 6 - return value is false without list of directives ok 7 - return value is false without list of directives ok 8 - return value is true without list of directives 1..8 ok t/add_config_file.t .. ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can('add_config_file') ok 3 - Missing file is actually missing ok 4 - add_config_file with missing file fails ok 5 - t/example.config exists ok 6 - add_config_file with empty file fails 1..6 ok t/clone.t ............ 1..17 ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can(...) ok 3 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 4 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 5 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 6 - Cloned object has right value after change ok 7 - Original object has right value after clone change ok 8 - Original object has right value after change ok 9 - Clone object has right value after original change ok 10 - Original object has 1 associated file ok 11 - Clone object has 1 associated file ok 12 - Original object returns right file ok 13 - Clone object returns right file ok 14 - Original object has 1 associated file ok 15 - Clone object has 1 associated file ok 16 - Original object returns right file ok 17 - Clone object returns right file ok t/exists.t ........... 1..20 ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can('exists') ok 3 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 4 - ConfigReader::Simple->can('exists') ok 5 - Directive [Test1] exists ok 6 - Directive [Test2] exists ok 7 - Directive [Test3] exists ok 8 - Directive [Test4] exists ok 9 - exists fails for Test5 ok 10 - get( Test5 ) fails ok 11 - ->exists fails ok 12 - exists fails for exists ok 13 - get( exists ) fails ok 14 - ->exists fails ok 15 - exists fails for blah ok 16 - get( blah ) fails ok 17 - ->exists fails ok 18 - exists fails for get ok 19 - get( get ) fails ok 20 - ->exists fails ok t/get.t .............. ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can('get') ok 3 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 4 - Test3 has right value ok 5 ok 6 - Test2 has right value ok 7 ok 8 - Zero has right value as string ok 9 - Zero has right value as number ok 10 - Undef has right value (empty) ok 11 - Continuation line has right value ok 12 ok 13 - Test has no value with get() ok 14 - Test has no value with AUTOLOAD ok 15 - Test5 has no value with get() ok 16 - Test5 has no value with AUTOLOAD ok 17 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 18 - Test3 has right value with AUTOLOAD ok 19 - Scope has right value with AUTOLOAD ok 20 - Test2 has right value with AUTOLOAD ok 21 - Test10 has right value with AUTOLOAD ok 22 - Test3 has right value with get(), before global ok 23 - Test2 has right value with get(), before global ok 24 - Test10 has right value with get), before global ok 25 - t/global.config exists ok 26 - Added t/global.config ok 27 - Scope has right value after adding t/global.config ok 28 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 29 - Scope has right value with AUTOLOAD, missing file ok 30 ok 31 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 32 - TestA has right value (from string) ok 33 - TestB has right value (from string) ok 34 - TestC has right value (from string) ok 35 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 36 - TestA has right value (from string) ok 37 - TestB has right value (from string) ok 38 - TestC has right value (from string) 1..38 ok t/load.t ............. 1..1 ok 1 - use ConfigReader::Simple; ok t/new_multiple.t ..... ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can('new_multiple') ok 3 - eval fails with no arguments ok 4 - reports that it must be an array ref ok 5 - reports that Files is the problem ok 6 - eval fails with no arguments ok 7 - reports that it must be an array ref ok 8 - reports that Files is the problem ok 9 - eval fails with no arguments ok 10 - reports that it must be an array ref ok 11 - reports that Keys is the problem 1..11 ok t/new_string.t ....... ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can('new_string') ok 3 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 4 ok 5 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 6 ok 7 - new_string fails with no arguments ok 8 ok 9 - new_string fails when string contains a non-reference ok 10 ok 11 - new_string fails when Keys value is the empty string ok 12 ok 13 - new_string fails when Keys value is the empty string ok 14 1..14 ok t/parse.t ............ ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can('parse') ok 3 - Missing file is actually missing ok 4 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 5 - ConfigReader::Simple->can('parse') ok 6 - parse fails with missing file, $Warn and $Die off ok 7 - Missing file is actually missing ok 8 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 9 - ConfigReader::Simple->can('parse') ok 10 - parse fails with missing file, $Warn and $Die off ok 11 - Missing file is actually missing ok 12 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 13 - ConfigReader::Simple->can('parse') ok 14 - parse fails with missing file ok 15 - Missing file is actually missing ok 16 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 17 - ConfigReader::Simple->can('parse') ok 18 - parse fails with missing file ok 19 - File exists ok 20 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 21 - ConfigReader::Simple->can('parse') ok 22 - parsing file is just fine 1..22 ok t/parse_line.t ....... ok 1 - use ConfigReader::Simple; ok 2 - parse_line is defined ok 3 ok 4 ok 5 - eval of parse_line failed with empty string ok 6 - Reports that it can't parse the string 1..6 ok t/parse_string.t ..... ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can('parse_string') ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok t/pod.t .............. 1..1 ok 1 - POD test for blib/lib/ConfigReader/Simple.pm ok t/pod_coverage.t ..... 1..1 ok 1 - Pod coverage on ConfigReader::Simple ok t/remove.t ........... 1..5 ok 1 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 2 - Test3 has the right value ok 3 - Test3 is removed ok 4 - Test3 no longer exists ok 5 - Tenor does not exist, but was removed ok t/save.t ............. 1..22 ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can('save') ok 3 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 4 - No arguments emits warning ok 5 - No arguments return undef ok 6 - There is nothing in $@ for a warning ok 7 - File does not exist ok 8 - Single argument returns true value ok 9 - File exists ok 10 - Bad arguments return undef ok 11 - Error string says the right thing ok 12 - Bad arguments return undef ok 13 - Error string says the right thing ok 14 - Bad arguments return undef ok 15 - Error string says the right thing ok 16 - Bad arguments return undef ok 17 - Error string says the right thing ok 18 - Three arguments return undef ok 19 ok 20 - Four arguments return true ok 21 - _save mock fails as it should ok 22 ok t/set.t .............. 1..19 ok 1 - use ConfigReader::Simple; ok 2 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 3 - Test1 has the right value with get ok 4 - Test1 has the right value with autoload ok 5 - Pagagena has the right value with get ok 6 - Pagagena has the right value with autoload ok 7 - Tamino has the right value with get ok 8 - Tamino has the right value with autoload ok 9 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 10 - $@ is set while trying to set with a scalar reference ok 11 ok 12 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 13 - set complains when $Warn is set and given a reference ok 14 - An object of class 'ConfigReader::Simple' isa 'ConfigReader::Simple' ok 15 - set silent when $Warn, $Die are unset and given a reference ok 16 - Unset thing that exists [Test2] ok 17 - Unset thing [Test2] still has value ok 18 - Unset thing that does not exist [$directive] ok 19 - Unset thing that did not exist [$directive] exists ok t/validate_keys.t .... ok 1 - use ConfigReader::Simple; ok 2 - ConfigReader::Simple->can('_validate_keys') ok 3 - _validate_keys returns true without validkeys set ok 4 - eval fails when validkeys is not an aray ref ok 5 - Passing non array ref fails ok 6 - eval fails when Buster directive is missing ok 7 - Missing key fails 1..7 ok All tests successful. Files=17, Tests=205, 1 wallclock secs ( 0.05 usr 0.02 sys + 0.80 cusr 0.12 csys = 0.99 CPU) Result: PASS make[1]: Leaving directory '/srv/build/libconfigreader-simple-perl-1.296' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libconfigreader-simple-perl/ make -j8 install DESTDIR=/srv/build/libconfigreader-simple-perl-1.296/debian/libconfigreader-simple-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/srv/build/libconfigreader-simple-perl-1.296' Manifying 1 pod document Installing /srv/build/libconfigreader-simple-perl-1.296/debian/libconfigreader-simple-perl/usr/share/perl5/ConfigReader/Simple.pm Installing /srv/build/libconfigreader-simple-perl-1.296/debian/libconfigreader-simple-perl/usr/share/man/man3/ConfigReader::Simple.3pm make[1]: Leaving directory '/srv/build/libconfigreader-simple-perl-1.296' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libconfigreader-simple-perl' in '../libconfigreader-simple-perl_1.296-1_all.deb'.  dpkg-genbuildinfo --build=binary -O../libconfigreader-simple-perl_1.296-1_amd64.buildinfo  dpkg-genchanges -DDistribution=landing --build=binary -mDebian Perl Group -eDebian Perl Group -O../libconfigreader-simple-perl_1.296-1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included)  dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) This build required 237.7KiB of dedicated disk space. ┌────────────────────────────────────┐ │ Retrieving build artifacts │ └────────────────────────────────────┘ Copied 4 files. Done.