debspawn 0.6.5 on fennel at 2024-10-16 09:17:52 UTC-0700 gpgv: Signature made Wed 31 Jul 2024 02:50:15 PM PDT gpgv: using RSA key C603FC4E600F1CECD1C8D97C4B53D931E4D3E863 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for /var/lib/lkspark/workspaces/b1ec69b5-0fc4-4a3e-b6c3-e75c616192e1/libio-stringy-perl_2.113-2.dsc: no acceptable signature found dpkg-source: info: extracting libio-stringy-perl in libio-stringy-perl-2.113 dpkg-source: info: unpacking libio-stringy-perl_2.113.orig.tar.gz dpkg-source: info: unpacking libio-stringy-perl_2.113-2.debian.tar.xz ╔═══════════════════════╗ ║ Package build ║ ╚═══════════════════════╝ Package: libio-stringy-perl Version: 2.113-2 Distribution: landing Architecture: amd64 Free space in workspace: 67.4GiB ┌───────────────────────────────────────┐ │ Preparing container for build │ └───────────────────────────────────────┘ Get:1 https://repo.pureos.net/pureos landing InRelease [9625 B] Fetched 9625 B in 0s (35.2 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version (12.10). dpkg-dev is already the newest version (1.21.22pureos1). fakeroot is already the newest version (1.36-1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ┌───────────────────────────────────────────────┐ │ Installing package build-dependencies │ └───────────────────────────────────────────────┘ Note, using directory './' to get the build dependencies Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1t64 libpipeline1 libtool libuchardet0 libxml2 m4 man-db po-debconf sensible-utils 0 upgraded, 29 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/19.8 MB of archives. After this operation, 75.4 MB of additional disk space will be used. debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13780 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.24_all.deb ... Unpacking sensible-utils (0.0.24) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.45-3_amd64.deb ... Unpacking libmagic-mgc (1:5.45-3) ... Selecting previously unselected package libmagic1t64:amd64. Preparing to unpack .../02-libmagic1t64_1%3a5.45-3_amd64.deb ... Unpacking libmagic1t64:amd64 (1:5.45-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.45-3_amd64.deb ... Unpacking file (1:5.45-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.22.5-2_amd64.deb ... Unpacking gettext-base (0.22.5-2) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.8-1+b1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.8-1+b1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.23.0-5_amd64.deb ... Unpacking groff-base (1.23.0-5) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.40.2-9_amd64.deb ... Unpacking bsdextrautils (2.40.2-9) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.8-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.8-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.13.0-1_amd64.deb ... Unpacking man-db (2.13.0-1) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-4_amd64.deb ... Unpacking m4 (1.4.19-4) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.72-3_all.deb ... Unpacking autoconf (2.72-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.22.5-2_all.deb ... Unpacking autopoint (0.22.5-2) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.20_all.deb ... Unpacking libdebhelper-perl (13.20) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-7_all.deb ... Unpacking libtool (2.4.7-7) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.14.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.14.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.14.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.14.0-1) ... Selecting previously unselected package libelf1t64:amd64. Preparing to unpack .../21-libelf1t64_0.191-2_amd64.deb ... Unpacking libelf1t64:amd64 (0.191-2) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.15-1+b1_amd64.deb ... Unpacking dwz (0.15-1+b1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../23-libicu72_72.1-5_amd64.deb ... Unpacking libicu72:amd64 (72.1-5) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../24-libxml2_2.12.7+dfsg+really2.9.14-0.1_amd64.deb ... Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.1) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.22.5-2_amd64.deb ... Unpacking gettext (0.22.5-2) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.20_all.deb ... Unpacking debhelper (13.20) ... Setting up libpipeline1:amd64 (1.5.8-1) ... Setting up libicu72:amd64 (72.1-5) ... Setting up bsdextrautils (2.40.2-9) ... Setting up libmagic-mgc (1:5.45-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.20) ... Setting up libmagic1t64:amd64 (1:5.45-3) ... Setting up gettext-base (0.22.5-2) ... Setting up m4 (1.4.19-4) ... Setting up file (1:5.45-3) ... Setting up libelf1t64:amd64 (0.191-2) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.22.5-2) ... Setting up autoconf (2.72-3) ... Setting up dwz (0.15-1+b1) ... Setting up sensible-utils (0.0.24) ... Setting up libuchardet0:amd64 (0.0.8-1+b1) ... Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-0.1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.14.0-1) ... Setting up gettext (0.22.5-2) ... Setting up libtool (2.4.7-7) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.14.0-1) ... Setting up groff-base (1.23.0-5) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.13.0-1) ... Building database of manual pages ... Setting up debhelper (13.20) ... Processing triggers for libc-bin (2.40-3) ... ┌───────────────┐ │ Build │ └───────────────┘ dpkg-buildpackage: info: source package libio-stringy-perl dpkg-buildpackage: info: source version 2.113-2 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: host architecture amd64  dpkg-source --before-build .  debian/rules clean dh clean dh_clean  debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/srv/build/libio-stringy-perl-2.113=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/srv/build/libio-stringy-perl-2.113=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for IO::Stringy Writing MYMETA.yml and MYMETA.json dh_auto_build make -j4 make[1]: Entering directory '/srv/build/libio-stringy-perl-2.113' cp lib/IO/Wrap.pm blib/lib/IO/Wrap.pm cp lib/IO/InnerFile.pm blib/lib/IO/InnerFile.pm cp lib/IO/ScalarArray.pm blib/lib/IO/ScalarArray.pm cp lib/IO/Lines.pm blib/lib/IO/Lines.pm cp lib/IO/Stringy.pm blib/lib/IO/Stringy.pm cp lib/IO/Scalar.pm blib/lib/IO/Scalar.pm cp lib/IO/AtomicFile.pm blib/lib/IO/AtomicFile.pm cp lib/IO/WrapTie.pm blib/lib/IO/WrapTie.pm Manifying 8 pod documents make[1]: Leaving directory '/srv/build/libio-stringy-perl-2.113' dh_auto_test make -j4 test TEST_VERBOSE=1 make[1]: Entering directory '/srv/build/libio-stringy-perl-2.113' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-report-prereqs.t .. 1..1 # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.70 # # === Test Requires === # # Module Want Have # ------------------- ---- -------- # ExtUtils::MakeMaker any 7.70 # File::Basename any 2.86 # File::Spec any 3.88 # File::Temp any 0.2311 # FileHandle any 2.05 # IO::File any 1.52 # IO::Handle any 1.52 # Symbol any 1.09 # Test::More 0.88 1.302194 # Test::Tester any 1.302194 # strict any 1.12 # warnings any 1.65 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # ---------- ---- ----- # Carp any 1.54 # Exporter 5.57 5.77 # File::Spec any 3.88 # FileHandle any 2.05 # IO::File any 1.52 # IO::Handle any 1.52 # Symbol any 1.09 # overload any 1.37 # parent any 0.241 # strict any 1.12 # warnings any 1.65 # ok 1 ok t/IO_InnerFile.t ....... 1..7 ok 1 - readline: got the right second line ok 2 - readline: got the right third line ok 3 - readline: undef reached when past our definition ok 4 - readline: list context: got the right number ok 5 - readline: list context: got the right second line ok 6 - readline: list context: got the right third line ok 7 - readline: slurpy: got full contents ok t/IO_Lines.t ........... 1..33 ok 1 - open: open a scalar on a ref to an array ok 2 - print: able to print to the handle ok 3 - seek/getc: got A ok 4 - seek/getc: got space ok 5 - seek/getc: got d ok 6 - getline: got the line ok 7 - getline: get subsequent line ok 8 - getline: repeat past end of stream ok 9 - getlines: got our original input! ok 10 - read: read(10) got correct value ok 11 - read: read(10) again got correct value ok 12 - tell: got correct current position ok 13 - read(1000): got full slurped value ok 14 - seek(2,0) - read: got correct value ok 15 - seek(-6,2) - read(): got correct value ok 16 - seek(-7,1) - read(): got correct value ok 17 - tie: got tied handle ok 18 - tied seek readline: got correct value ok 19 - tied seek readlines: got correct value ok 20 - recordsep: undef - getline ok 21 - recordsep: undef - get first line ok 22 - recordsep: undef - slurp the rest ok 23 - recordsep: newline - rec 0 ok 24 - recordsep: newline - rec 1 ok 25 - recordsep: newline - rec 2 ok 26 - recordsep: newline - rec 3 ok 27 - recordsep: newline - rec 4 ok 28 - recordsep: newline - rec 5 ok 29 - recordsep: newline - rec 6 ok 30 - recordsep: newline - rec 7 ok 31 - recordsep: newline - rec 8 ok 32 - recordsep: newline - rec 9 ok 33 - recordsep: newline - rec 10 ok t/IO_Scalar.t .......... 1..39 ok 1 - open: open a scalar on a ref to a string ok 2 - fileno() returns undef ok 3 - print: able to print ok 4 - print: able to print again ok 5 - seek/getc: got A ok 6 - seek/getc: got space ok 7 - seek/getc: got d ok 8 - getline: got the line ok 9 - getline: get subsequent line ok 10 - getline: repeat past end of stream ok 11 - read: read(10) got correct value ok 12 - read: read(10) again got correct value ok 13 - tell: got correct current position ok 14 - read(1000): got full slurped value ok 15 - seek(2,0) - read: got correct value ok 16 - seek(-6,2) - read(): got correct value ok 17 - seek(-7,1) - read(): got correct value ok 18 - tie: got tied handle ok 19 - tied seek readline: got correct value ok 20 - tied seek readlines: got correct value ok 21 - recordsep: undef - getline ok 22 - recordsep: undef - get first line ok 23 - recordsep: undef - slurp the rest ok 24 - recordsep: empty - first par ok 25 - recordsep: empty - second par ok 26 - recordsep empty - third par ok 27 - recordsep: custom - first rec ok 28 - recordsep: custom - second rec ok 29 - recordsep: newline - rec 0 ok 30 - recordsep: newline - rec 1 ok 31 - recordsep: newline - rec 2 ok 32 - recordsep: newline - rec 3 ok 33 - recordsep: newline - rec 4 ok 34 - recordsep: newline - rec 5 ok 35 - recordsep: newline - rec 6 ok 36 - recordsep: newline - rec 7 ok 37 - recordsep: newline - rec 8 ok 38 - recordsep: newline - rec 9 ok 39 - recordsep: newline - rec 10 ok t/IO_ScalarArray.t ..... 1..33 ok 1 - open: open a scalar on a ref to an array ok 2 - fileno() returns undef ok 3 - print: Able to print to handle ok 4 - print, Able to print to handle ok 5 - SAH: seek(0, 0) and getc() to buffer ok 6 - getline/seek: got part of 1st line ok 7 - getline/next: next getline gets subsequent line ok 8 - getline/eof: repeated getline() finds end of stream ok 9 - getline/getlines: seek(0,0) and getlines slurps in string ok 10 - read/first10: reading first 10 bytes with seek(0,START) + read(10) ok 11 - read/next10: reading next 10 bytes with read(10) ok 12 - read/tell20: tell() the current location as 20 ok 13 - read/slurp: seek(0,start)+read(1000) reads in whole handle ok 14 - seek/set: seek(2, set) + read(5) returns "diner" ok 15 - seek/end: seek(-6,end)+read(3) returns "too" ok 16 - SEEK/CUR: seek(-7,CUR) + read(7) returns 'one too' ok 17 - tie: got tied handle ok 18 - tied seek readline: got correct value ok 19 - tied seek readlines: got correct value ok 20 - RECORDSEP undef: getline slurps everything ok 21 - RECORDSEP undef: get first line ok 22 - RECORDSEP undef: slurp the rest ok 23 - RECORDSEP newline: rec 0 ok 24 - RECORDSEP newline: rec 1 ok 25 - RECORDSEP newline: rec 2 ok 26 - RECORDSEP newline: rec 3 ok 27 - RECORDSEP newline: rec 4 ok 28 - RECORDSEP newline: rec 5 ok 29 - RECORDSEP newline: rec 6 ok 30 - RECORDSEP newline: rec 7 ok 31 - RECORDSEP newline: rec 8 ok 32 - RECORDSEP newline: rec 9 ok 33 - RECORDSEP newline: rec 10 ok t/IO_WrapTie.t ......... 1..5 ok 1 - 'new: got the object' isa 'IO::WrapTie::Master' ok 2 - print {FH} ARGS: tied string is correct ok 3 - FH->print(ARGS): tied string is correct ok 4 - array = ok 5 - FH->sref ok t/simple.t ............. 1..6 ok 1 - sref: Got the correct string ok 2 - readline: got the right first line ok 3 - array aref: got the right contents ok 4 - array readline: got the right first line ok 5 - lines aref: got the right content ok 6 - lines readline: got the right first line ok t/two.t ................ 1..3 ok 1 - COHERENT STRING 1 ok 2 - COHERENT STRING 2 ok 3 - COHERENT STRING 3 ok All tests successful. Files=8, Tests=127, 1 wallclock secs ( 0.05 usr 0.03 sys + 0.63 cusr 0.13 csys = 0.84 CPU) Result: PASS make[1]: Leaving directory '/srv/build/libio-stringy-perl-2.113' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libio-stringy-perl/ make -j4 install DESTDIR=/srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/srv/build/libio-stringy-perl-2.113' Manifying 8 pod documents Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/perl5/IO/Lines.pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/perl5/IO/InnerFile.pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/perl5/IO/AtomicFile.pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/perl5/IO/Stringy.pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/perl5/IO/WrapTie.pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/perl5/IO/ScalarArray.pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/perl5/IO/Scalar.pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/perl5/IO/Wrap.pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/man/man3/IO::Scalar.3pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/man/man3/IO::InnerFile.3pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/man/man3/IO::Stringy.3pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/man/man3/IO::AtomicFile.3pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/man/man3/IO::ScalarArray.3pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/man/man3/IO::Lines.3pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/man/man3/IO::WrapTie.3pm Installing /srv/build/libio-stringy-perl-2.113/debian/libio-stringy-perl/usr/share/man/man3/IO::Wrap.3pm make[1]: Leaving directory '/srv/build/libio-stringy-perl-2.113' dh_installdocs dh_installchangelogs dh_installexamples dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libio-stringy-perl' in '../libio-stringy-perl_2.113-2_all.deb'.  dpkg-genbuildinfo --build=binary -O../libio-stringy-perl_2.113-2_amd64.buildinfo  dpkg-genchanges -DDistribution=landing --build=binary -mDebian Perl Group -eDebian Perl Group -O../libio-stringy-perl_2.113-2_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included)  dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) This build required 582.1KiB of dedicated disk space. ┌────────────────────────────────────┐ │ Retrieving build artifacts │ └────────────────────────────────────┘ Copied 4 files. Done.