debspawn 0.6.5 on dill at 2024-05-10 03:31:08 UTC+0000 dpkg-source: info: extracting libcpan-meta-requirements-perl in libcpan-meta-requirements-perl-2.143 dpkg-source: info: unpacking libcpan-meta-requirements-perl_2.143.orig.tar.gz dpkg-source: info: unpacking libcpan-meta-requirements-perl_2.143-1.debian.tar.xz ╔═══════════════════════╗ ║ Package build ║ ╚═══════════════════════╝ Package: libcpan-meta-requirements-perl Version: 2.143-1 Distribution: landing Architecture: amd64 Free space in workspace: 389.1GiB ┌───────────────────────────────────────┐ │ Preparing container for build │ └───────────────────────────────────────┘ Get:1 https://repo.pureos.net/pureos landing InRelease [9625 B] Fetched 9625 B in 0s (52.5 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version (12.9). dpkg-dev is already the newest version (1.21.22pureos1). fakeroot is already the newest version (1.31-1.2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ┌───────────────────────────────────────────────┐ │ Installing package build-dependencies │ └───────────────────────────────────────────────┘ Note, using directory './' to get the build dependencies Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism dwz file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1 libfile-stripnondeterminism-perl libicu72 libmagic-mgc libmagic1 libpipeline1 libsub-override-perl libtool libuchardet0 libxml2 m4 man-db po-debconf sensible-utils 0 upgraded, 30 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/18.7 MB of archives. After this operation, 72.4 MB of additional disk space will be used. debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 13109 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.44-3_amd64.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../02-libmagic1_1%3a5.44-3_amd64.deb ... Unpacking libmagic1:amd64 (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.44-3_amd64.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-12_amd64.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../05-libuchardet0_0.0.7-1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.22.4-10_amd64.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.38.1-5pureos1_amd64.deb ... Unpacking bsdextrautils (2.38.1-5pureos1) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../08-libpipeline1_1.5.7-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.11.2-2_amd64.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-3_amd64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../22-libelf1_0.188-2.1_amd64.deb ... Unpacking libelf1:amd64 (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1_amd64.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:amd64. Preparing to unpack .../24-libicu72_72.1-3_amd64.deb ... Unpacking libicu72:amd64 (72.1-3) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.3~deb12u1_amd64.deb ... Unpacking libxml2:amd64 (2.9.14+dfsg-1.3~deb12u1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-12_amd64.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Setting up libpipeline1:amd64 (1.5.7-1) ... Setting up libicu72:amd64 (72.1-3) ... Setting up bsdextrautils (2.38.1-5pureos1) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up libmagic1:amd64 (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up file (1:5.44-3) ... Setting up autotools-dev (20220109.1) ... Setting up autopoint (0.21-12) ... Setting up autoconf (2.71-3) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:amd64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-4) ... Setting up libelf1:amd64 (0.188-2.1) ... Setting up libxml2:amd64 (2.9.14+dfsg-1.3~deb12u1) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-12) ... Setting up libtool (2.4.7-5) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.11.2-2) ... Building database of manual pages ... Setting up debhelper (13.11.4) ... Processing triggers for libc-bin (2.36-9+deb12u4) ... ┌───────────────┐ │ Build │ └───────────────┘ dpkg-buildpackage: info: source package libcpan-meta-requirements-perl dpkg-buildpackage: info: source version 2.143-1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: host architecture amd64 dpkg-source --before-build . debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2 -ffile-prefix-map=/srv/build/libcpan-meta-requirements-perl-2.143=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" "LD=x86_64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/srv/build/libcpan-meta-requirements-perl-2.143=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for CPAN::Meta::Requirements Writing MYMETA.yml and MYMETA.json dh_auto_build make -j8 make[1]: Entering directory '/srv/build/libcpan-meta-requirements-perl-2.143' cp lib/CPAN/Meta/Requirements.pm blib/lib/CPAN/Meta/Requirements.pm cp lib/CPAN/Meta/Requirements/Range.pm blib/lib/CPAN/Meta/Requirements/Range.pm Manifying 2 pod documents make[1]: Leaving directory '/srv/build/libcpan-meta-requirements-perl-2.143' dh_auto_test make -j8 test TEST_VERBOSE=1 make[1]: Entering directory '/srv/build/libcpan-meta-requirements-perl-2.143' PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-report-prereqs.t .. 1..1 # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ------- -------- # ExtUtils::MakeMaker 6.17 7.64 # perl v5.10.0 5.036000 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 7.64 # # === Test Requires === # # Module Want Have # ------------------- ------- -------- # ExtUtils::MakeMaker any 7.64 # File::Spec any 3.84 # Test::More 0.88 1.302190 # perl v5.10.0 5.036000 # version 0.88 0.9929 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150010 # # === Runtime Requires === # # Module Want Have # -------- -------- -------- # B any 1.83 # Carp any 1.52 # perl 5.010000 5.036000 # strict any 1.12 # version 0.88 0.9929 # warnings any 1.58 # ok 1 - Reported prereqs ok t/accepts.t ............ ok 1 - need 1, got 1 ok 2 - need 0, got 1 ok 3 - need 0, got 1 ok 4 - need 0, got undef ok 5 - need 0, got 'v0' ok 6 - need 0, got v1.2.3 ok 7 - need 0, got 'v1.2.3' ok 8 - need <=1, got 1 ok 9 - need <=1, got 2 ok 10 - need !1, got 0 ok 11 - need !1, got 1 ok 12 - need 1, got 1 ok 13 - need 0, got 1 ok 14 - need 0, got 1 ok 15 - need 0, got undef ok 16 - need 0, got 'v0' ok 17 - need 0, got v1.2.3 ok 18 - need 0, got 'v1.2.3' ok 19 - need <=1, got 1 ok 20 - need <=1, got 2 ok 21 - need !1, got 0 ok 22 - need !1, got 1 1..22 ok t/bad_version_hook.t ... # adding minimum requirement: Foo::Baz => invalid_version ok 1 - adding minimum 'Foo::Baz' for invalid_version # adding minimum requirement: Foo::Qux => version ok 2 - adding minimum 'Foo::Qux' for version # adding minimum requirement: Foo::Bar => 10 ok 3 - adding minimum 'Foo::Bar' for 10 ok 4 - hook stored module name ok 5 - hook fixes invalid version ok 6 - dies if hook doesn't return version object 1..6 ok t/basic.t .............. ok 1 - some basic minimums ok 2 - just minimums? simple ok 3 - max only ok 4 - maximums? not simple ok 5 - excl only ok 6 - min and max ok 7 - exclusions already outside range do not matter ok 8 - exclusions ok 9 - exclusions go away when made irrelevant ok 10 - we can exclude an endpoint ok 11 - can't exclude all values ok 12 - can't add outside-range exact spec to range ok 13 - maximum must exceed (or equal) minimum ok 14 - maximum must exceed (or equal) minimum ok 15 - if min==max, becomes exact requirement ok 16 - test exclusion-skipping ok 17 - structured requirements for Foo ok 18 - exact requirement ok 19 - can't exactly specify differing versions ok 20 - max < fixed ok 21 - min > fixed ok 22 - != && == ok 23 - requirements_for_module ok 24 - structured_requirements_for_module ok 25 - requirements_for_module() returns empty for not found (list) ok 26 - requirements_for_module() returns undef for not found (scalar) ok 27 - 0.00 precision preserved 1..27 ok t/finalize.t ........... ok 1 - some basic minimums ok 2 - we can add a Foo::Bar requirement with no effect post finalization ok 3 - can't add a higher Foo::Bar after finalization ok 4 - can't add a new module prereq after finalization ok 5 - can't clear an existing prereq after finalization ok 6 - we can clear a prereq that was not set to begin with ok 7 - none of our attempts to alter the object post-finalization worked ok 8 - we can alter a cloned V:R (finalization does not survive cloning) ok 9 - ...and original requirements are untouched 1..9 ok t/from-hash.t .......... ok 1 - '10' roundtrips ok 2 - '>= 2, <= 9, != 7' roundtrips ok 3 - we can load from a string hash ok 4 - we die when we can't understand a version spec ok 5 - undef requirement warns ok 6 - '' requirement warns ok 7 - undef requirement warns ok 8 - '' requirement warns ok 9 - undef/'' requirements treated as '0' ok 10 - vstring in string hash lives ok 11 - vstring treated as if string ok 12 - options work 2nd arg to f_s_h 1..12 ok t/merge.t .............. ok 1 ok 2 - add requirements to an existing set of requirements ok 3 - clone/add_requirements does not affect lhs ok 4 - clone/add_requirements does not affect rhs ok 5 - clone and add_requirements ok 6 - cleared the shared requirement ok 7 - clone with only max ok 8 - we do not lose 0-min reqs on merge 1..8 ok t/strings.t ............ ok 1 - exact version (==) ok 2 - lower version (==) ok 3 - higher version (==) ok 4 - exact version (!=) ok 5 - lower version (!=) ok 6 - higher version (!=) ok 7 - exact version (>=) ok 8 - lower version (>=) ok 9 - higher version (>=) ok 10 - exact version (<=) ok 11 - lower version (<=) ok 12 - higher version (<=) ok 13 - exact version ("") ok 14 - lower version ("") ok 15 - higher version ("") ok 16 - middle version (>=, <=, !) ok 17 - lower version (>=, <=, !) ok 18 - higher version (>=, <=, !) ok 19 - excluded version (>=, <=, !) ok 20 - lower version ("", !) ok 21 - exact version ("", !) ok 22 - middle version ("", !) ok 23 - excluded version ("", !) ok 24 - higher version ("", !) ok 25 - exact version (==) ok 26 - lower version (==) ok 27 - higher version (==) ok 28 - exact version (!=) ok 29 - lower version (!=) ok 30 - higher version (!=) ok 31 - exact version (>=) ok 32 - lower version (>=) ok 33 - higher version (>=) ok 34 - exact version (<=) ok 35 - lower version (<=) ok 36 - higher version (<=) ok 37 - exact version ("") ok 38 - lower version ("") ok 39 - higher version ("") ok 40 - middle version (>=, <=, !) ok 41 - lower version (>=, <=, !) ok 42 - higher version (>=, <=, !) ok 43 - excluded version (>=, <=, !) ok 44 - multiple requirements with implicit minimum ok 45 - 0.00 precision preserved ok 46 - conversion failure caught 1..46 ok t/version-cleanup.t .... ok 1 - 2-part literal v-string ok 2 - 1-part literal v-string ok 3 - 1-part literal v-string (0) 1..3 ok All tests successful. Files=9, Tests=134, 1 wallclock secs ( 0.04 usr 0.00 sys + 0.45 cusr 0.08 csys = 0.57 CPU) Result: PASS make[1]: Leaving directory '/srv/build/libcpan-meta-requirements-perl-2.143' create-stamp debian/debhelper-build-stamp dh_prep dh_auto_install --destdir=debian/libcpan-meta-requirements-perl/ make -j8 install DESTDIR=/srv/build/libcpan-meta-requirements-perl-2.143/debian/libcpan-meta-requirements-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr make[1]: Entering directory '/srv/build/libcpan-meta-requirements-perl-2.143' Manifying 2 pod documents Installing /srv/build/libcpan-meta-requirements-perl-2.143/debian/libcpan-meta-requirements-perl/usr/share/perl5/CPAN/Meta/Requirements.pm Installing /srv/build/libcpan-meta-requirements-perl-2.143/debian/libcpan-meta-requirements-perl/usr/share/perl5/CPAN/Meta/Requirements/Range.pm Installing /srv/build/libcpan-meta-requirements-perl-2.143/debian/libcpan-meta-requirements-perl/usr/share/man/man3/CPAN::Meta::Requirements::Range.3pm Installing /srv/build/libcpan-meta-requirements-perl-2.143/debian/libcpan-meta-requirements-perl/usr/share/man/man3/CPAN::Meta::Requirements.3pm make[1]: Leaving directory '/srv/build/libcpan-meta-requirements-perl-2.143' dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libcpan-meta-requirements-perl' in '../libcpan-meta-requirements-perl_2.143-1_all.deb'. dpkg-genbuildinfo --build=binary -O../libcpan-meta-requirements-perl_2.143-1_amd64.buildinfo dpkg-genchanges -DDistribution=landing --build=binary -mDebian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org> -eDebian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org> -O../libcpan-meta-requirements-perl_2.143-1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) This build required 355.5KiB of dedicated disk space. ┌────────────────────────────────────┐ │ Retrieving build artifacts │ └────────────────────────────────────┘ Copied 4 files. Done.